Compressor Oils

Bart & Associates Industrial Equipment & Supplies | Kingsport TN
Bart & Associates Industrial Equipment & Supplies | Kingsport TN

Bart & Associates proprietary brand - Industri-Lube high quality full synthetic compressor oils that are compatible and mixable with original OEM oils, and meet & exceed the OEM oil specifications and performance. Industri-Lube synthetic compressor oils are used for all brands of compressors, including Atlas Copco, Compair, Gardner Denver, Ingersoll Rand, Joy, Kaeser, Leroi, Mattei, Quincy, Sullair and Worthington.

Industri-Lube Rotary Screw Compressor Oil Features & Benefits

  • Superior Oxidation Resistance - Longer Oil Life (8000 hours & up)
  • Excellent Thermal Stability - No varnish deposits and longer oil life
  • High Viscosity Index - better lubrication at low & high temperatures
  • Vapor Pressure - less oil carryover & less oil consumption
  • Reduced Coefficient of Friction - lower energy costs

Industri-Lube Reciprocating Compressor Oil Features & Benefits

  • Excellent Solvency - No carbon deposits
  • Superior High Temp Stability - No oil breakdown and no deposits
  • Superior Wear Protection - top quality anti-wear additives and long equipment life
  • Higher Flash Point & Auto ignition Temp - increased operating safety
  • Reduced Coefficient of Friction - lower energy costs

INDUSTRI-LUBE OIL & COMPRESSOR OEM OIL CROSS REFERENCE

Industri-L.
Crossover
Atlas CopcoCompairGardner-
Denver
Ingersoll-
Rand
KaeserLeROIQuincySullair
------------SSR ULTRA
COOLANT
----------------
I-PGS----------------------------SULLUBE
32
GA-8KHD
Roto Fluid
Air Lube
46
AEON
9000 SP
----S-460SSL 46
46 Plus
QUIN-SYNLLL-4
I-46PEP--------AEON BIO------------QUIN-SYN
HP
----
I-46FGGA-FGCSX20AEON
6000FG
FG
COOLANT
FG-460SSL 35FQUIN-SYN
FG
----
I-68D----CS200AEON
8000
SSR
COOLANT
----------------
I-100D----CS300AEON 5000XL 700S100------------
I-150D----CS400----XL 740HTS150------------
I-46PSRoto
Inject F1
----AEON 4000----M-460SSL 38
SSL 50
QUIN-SYN
2085
----
I-PGE--------AEON
PG
------------QUIN-SYN
PG
----
I-46PE--------------------Comp Lube 10QUIN-SYN
PLUS
----
I-24S------------Platinum
BTG
------------24kt
FLUID
I-CleanerGA-OK----Comp
Clean II
--------CleanerFlushing
Oil
----
I-68Plus--------AEON
9000TH
--------------------

Industri-Lube compressor oils are Compatible with and Mixable with OEM compressor oils, and also Meet AND Exceed the OEM oil specifications and performance.

Partial Synthetic Compressor Oils:
A blend of synthetic and premium petroleum base fluids designed for use in rotary screw, rotary vane, and reciprocating air compressors. The unique additive systems and highest quality synthetic components in these products make them greatly superior to petroleum products and competitive partial synthetics. The Industri-Lube PS Series extends service life up to 4,000+ hours in rotary screw compressors under good operating conditions.

Premium Synthetic Blend Compressor Oils:
The SVO Series are full synthetic lubricants designed for high performance in air compressors and vacuum pumps. The SVO Series utilizes the latest base oil technology available in combination with excellent lubricant additive systems to provide the performance of a synthetic at a lower cost. The SVO Series are formulated from severely hydro-treated, hydro-cracked hydrocarbon base fluids. SVO 32, 46, and 68 are designed for rotary screw compressors and yield a service life of 6,000+ hours at wide temperature ranges in good operating conditions. SVO 100 is designed for reciprocating compressors.

PAO Compressor Oils:
The Industri-Lube PAO-based series are 100% synthetic compressor oils formulated with the highest quality polyalphaolefin (PAO) base fluids. These premium synthetic oils are used where maximum seal, paint, and plastics compatibility is required. I-32P, I-46P, and I-68P are designed for rotary screw applications and offer a service life of up to 8,000 hours under a wide range of temperatures under good operating conditions. These are the quality synthetics to replace branded OEM PAO's.

Diester Compressor Oils:
The Industri-Lube diester-based series are synthetic compressor oils specially formulated with premium synthetic ester base fluids for use in a wide variety of air compressors. I-46D and I-68D are designed for rotary screw compressors and will offer a typical service life of 8,000 hours under good operating conditions. I-68D and I-100D are very popular fluids for rotary vane service, typically up to 4,000 hours. I-100D and I-150D are designed for reciprocating compressors and are recommended for high pressure air compressors. I-100D and I-150D are also recommended for reciprocating compressors and vacuum pumps handling the following gases:

Air Ethylene Natural Gas Carbon Dioxide (dry) Hydrogen Methane Synthesis Gas Helium Hydrogen Sulfide (dry) Sulphur Hexafluoride PropaneButadiene Carbon Monoxide Nitrogen Furnace (cracked) Gas

PAG/Ester Compressor Oils:
Industri-Lube I-PGE/PGI and I-PGS are produced from a unique blend of polyalkylene glycol (PAG) and pentaerythritol esters, which together form an exceptional coolant which reduces oxidation and deposit formation. These Coolants offer excellent heat transfer properties, long life, high flash points, low evaporation, biogradability, and excellent hydrolytic stability. They do not form varnish deposits like petroleum or PAO oils. I-PGE/PGI and I-PGS are the generic alternatives to Ingersoll Rand SSR Ultra Coolant® and Sullube® 32 respectively and give the equivalent service life of 8,000+ hours in rotary screw compressors.

PAO/POE Compressor Oils:
The Industri-Lube I-46 PE and I-68 Plus are made with a very thermally and oxidatively stable polyol ester (POE) blend. These premium synthetic lubricants are formulated to resist varnish formation under high temperature applications and to be more resistant to acidic intake air than polyalkylene gylcol coolants. Under normal operating conditions you can expect to obtain up to 10,000+ hours of lubricant service life in rotary screw compressors.

POE Compressor Oils:
The Industri-Lube PEP Series are formulated from 100% premium polyol ester (POE) base fluids for extremely long life in compressor applications. These products are greater than 90% biodegradable as measured by the CEC L33 biodegradability test. New additive technology assures long lasting protection. I-32 PEP and I-46 PEP are designed for rotary screw compressors with service life rated for >12,000 hours in most operating conditions.

Centrifugal Compressor Synthetic Compressor Oil:
Industri-Lube I-32UG is designed for use in centrifugal compressors that require an ISO 32 viscosity. It is a 100% synthetic, bio-friendly lubricant based on a thermally and oxidatively stable polyol ester (POE)/polyalkylene glycol (PAG) blend. I-32UG was formulated to help prevent rust and copper corrosion and to resist vanish formation. I-32UG should not be mixed with synthetic hydrocarbon or petroleum oils.

Silicone Compressor Oil:
Industri-Lube I-24S is a super premium synthetic silicone compressor fluid designed to replace OEM silicone fluids in rotary screw compressors. This product is specially formulated with silicone base fluids and appropriate additives to perform over an extremely long period of time. It is fortified against rust, corrosion, oxidation and wear. I-24S is a direct replacement for OEM silicone-based fluids and may be used to top-off.

Compressor System Flush & Cleaner:
Industri-Lube I-Cleaner is a premium quality synthetic fluid designed to dissolve varnish and solubilize sludge from rotary-screw air compressors during operation. It can also be used as a systems flush when changing-over from mineral to synthetic oils in order to reduce contamination due to oil carry-over. Regular use of I-Cleaner will help you get the most out of your synthetic oil and your compressor by removing varnish and reducing operating temperature. I-Cleaner is safe to use for up to 500 hours in rotary screw applications when used at full strength.

RECEIVE A QUOTE

Contact Us

  • This field is for validation purposes and should be left unchanged.

OUR ADDRESS

1315 Belmeade Drive, Kingsport, TN 37664
Brian@bartassociates.com

to top button