Industrial Wastewater Evaporator Systems

Water Eater Model 240G

The Water Eater Model 240G is a natural gas or propane heated waste water evaporator. It is available in two models, the Model 240G Carbon Steel version and the Model 240G-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS). Installation is easy consisting of only a 120V electrical hookup, a 10" diameter vent stack, and a 3/4" standard pressure gas line. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump. After an initial heat up time of approximately one hour, the Model 240G will evaporate 22 gallons per hour of water. The Model 240G water evaporator will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained or vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out. To facilitate cleanout, the interior tank of the 240G is sloped towards the 2" outlet. The "U" shape burner tube is located around the perimeter of the process tank allowing access between the tubes5E will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out.

The 240G offers the following features & benefits:

  • Heavy Duty 12 Gauge Tank, Covers, & Stack (Carbon or 316L Stainless Steel)
  • Adjustable Burner (Natural Gas or Propane) with electronic ignition, flame rectification system, and air pressure sensor
  • Automatic Shutoffs (Low Level Control & High Temperature Shutdown) for unattended operation
  • Simple one button ON/OFF operation
  • Removable Lid and obstruction free tank floor for fast and easy cleanout
  • Fully Insulated Tank
  • Variable Weir skimmer standard on all units

 

  • Power exhaust allows venting to outdoors
  • Quality polyurethane finish
  • Tank Top at convenient 36" height to facilitate cleanout
  • Easily installed requiring only a vent stack and electrical hookup
  • Industry Standardized Components.  Most parts are available from major industrial supply houses.
  • Optional 70 GPM Self Priming Feed Pump
  • Optional Auto Fill System
  • One Year Warranty on Parts & Workmanship
EVAPORATION RATE22 Gallons / Hour
TANK CAPACITY240 Gallons (925 Liters)
TANK CONSTRUCTION12 Gauge Tank w/
1" Insulation;
16 Gauge Painted Exterior
TANK HEIGHT36"
SKIMMERAdjustable Weir Ball Valve
TANK FILL PORT2" NPT Coupling
HEATING SYSTEMGas: Natural Gas or Propane
285,000 BTU, 141" x
6.5" Heat Exchanger
DIMENSIONS
(FLOOR SPACE)
73"L x 35"W x 54"H
73"L x 41"W x 54"H
(with Pump or AFS)
UTILITY
REQUIREMENTS
3/4" Gas Line, 7" to 14" W.C.
120 VAC/1 Phase/13 Amps
DRAINFunnel Floor, 2"
Drain with Plug
VENT STACK10" Diameter
SHIPPING WEIGHT800 Lbs.
WARRANTYOne Year Parts &
Workmanship, Labor &
Corrosion excluded
RECEIVE A QUOTE

Contact Us

  • This field is for validation purposes and should be left unchanged.

OUR ADDRESS

1315 Belmeade Drive, Kingsport, TN 37664
Brian@bartassociates.com

to top button