Industrial Wastewater Evaporator Systems

Water Eater Model 125E

The Water Eater Model 125E is an electrically heated waste water evaporator designed for the small to medium sized generator of wastewater. It comes in two models, the Model 125E Carbon Steel version and the Model 125E-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS). Installation is easy consisting of only an electrical hookup and a 10" diameter vent stack. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump. After an initial heat up time of approximately one hour, the Model 125E will evaporate 12 gallons per hour of water. The Model 125E water evaporator will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out.

 

The 125E offers the following features & benefits:

  • Heavy Duty 12 Gauge Tank, Covers, & Stack (Carbon or 316L Stainless Steel)
  • Available in 240V or 480V configuration
  • Automatic Shutoffs (Low Level Control & High Temperature Shutdown) for unattended operation
  • Simple one button ON/OFF operation
  • Removable Lid and obstruction free tank floor for fast and easy cleanout
  • Fully Insulated Tank
  • Variable Weir skimmer standard on all units

 

  • Power exhaust allows venting to outdoors
  • Quality polyurethane finish
  • Tank Top at convenient 36" height to facilitate cleanout
  • Easily installed requiring only a vent stack and electrical hookup
  • Industry Standardized Components.  Most parts are available from major industrial supply houses.
  • Optional 70 GPM Self Priming Feed Pump
  • Optional Auto Fill System
  • One Year Warranty on Parts & Workmanship
EVAPORATION RATE12 Gallons / Hour
TANK CAPACITY125 Gallons
TANK CONSTRUCTION12 Gauge Tank w/
1" Insulation;
16 Gauge Painted Exterior
TANK HEIGHT36"
SKIMMERAdjustable Weir Ball Valve
TANK FILL PORT2" NPT Coupling
HEATING SYSTEMElevated, Electric
Heating System,
27,000 Watts
DIMENSIONS
(FLOOR SPACE)
38"L x 34"W x 46"H
38"L x 41"W x 46"H
(with Pump or AFS)
UTILITY
REQUIREMENTS
240 Volts/3 Phase/68 Amps
Optional 480V/3/34A
DRAINFlat, Obstruction Free Floor; 2"
Step-down Drain with Plug
VENT STACK10" Diameter
SHIPPING WEIGHT500 Lbs.
WARRANTYOne Year Parts &
Workmanship, Labor &
Corrosion excluded
RECEIVE A QUOTE

Contact Us

  • This field is for validation purposes and should be left unchanged.

OUR ADDRESS

1315 Belmeade Drive, Kingsport, TN 37664
Brian@bartassociates.com

to top button